What you need to build a custom wooden garage door and repair it:
You can create your own custom wooden door s build your bathroom cabinet. The doors can be finished with a stain or a coat of paint, depending on your bathroom design. This house project is a simple process and can be completed in a weekend.
Step 1 – Measure the bathroom
Use your measuring tape to determine the opening of your bathroom cabinet. You are going to install two doors over this space. Add an inch to the width measurement so that your doors are wide enough to overlap the cabinet. Divide the width size into two to find the width of each of the doors. Write the measurements on a piece of paper.
Step 2 – Choose your wood
Go to your local lumber or home store and talk to a professional about your plans to make doors for your bathroom cabinet. Take your measurements with you. Make sure you use wood that is ¾ inch thick. Choose a type of wood that fits well with your bathroom design and that fits your budget. Tips to take care of the doors and garage door repair.
Step 3 – Cut off doors
Use your measuring tape to mark the dimensions of your cupboard doors on your wood. Cut the doors with your chainsaw out of the wood. Attach a piece of fine sandpaper to your electric sander. Use your electric sander to smooth the surface of the wood.
Step 4 – Apply Finish
Use your brush to apply a stain or coat of paint to your cabinet doors. Read the stain or paint manufacturer’s instructions before using it. Apply the finish in long, even movements. Make sure that you work in the same direction as the wood grain. Allow the finish to allow sufficient time for complete drying. If necessary, apply a second layer of finish to the doors and let it dry.
Step 5 – Attach the door hinges
Place your doors on a hard, flat surface. Place the doors so that they point downwards. Use a pencil and your measuring tape to mark a spot about 10 cm from the top and bottom of the doors. Place the hinges on the door at the spot you have marked. Use a level to ensure that the hinges are in a horizontal position. Use your screws and a screwdriver to attach the hinges to the door. Continue the process with the second door.
Step 6 – Attach the door handles
Place your doors so that they point upwards. Use your pencil and tape measure to mark a spot about five inches from the edge of the door. Use your screws and a screwdriver to attach the knob to the door. Continue the process with the second door.
Step 7 – Secure the doors of the cabinet
You need a friend or family member to secure the door to the cupboard. Use your level to ensure that one of the doors is in a horizontal position. Use your screws and a screwdriver to attach the cabinet door. Continue the process with the second door.